ویرایش محتوا

توضیحات تکمیلی

Installation	FTS1 NH Horizontal, FTS1 VH Vertical
Connection Size (mm)	Flanged 25, Screwed 15, Socket Welded 20
Orifice No.	10, 21, 5
Maximum Operating Pressure (MPaG)	0.5, 1.0, 2.1
Maximum Differential Pressure (MPa)	0.5, 1.0, 2.1
Minimum Operating Pressure (MPaG)	0.01
Maximum Operating Temperature (C)	350

ویرایش محتوا

Line numbers within the graph refer to orifice numbers.
Differential pressure is the difference between the inlet and outlet pressure of the
trap.
Capacities are based on continuous discharge of condensate 6°C below saturated steam temperature.
Recommended safety factor: at least 1.5.

CAUTION

DO NOT use this product under conditions that exceed maximum differential pressure, as condensate backup will occur!

The torque for each part is shown in the following table.

ویرایش محتوا

FT S1

FREE FLOAT STEAM TRAP WITH THREE-POINT SEATING AND THERMOSTATIC A

Inline repairable stainless steel steam trap for steam mains, tracer lines and small process applications.

Self-modulating free float provides continuous, smooth, low velocity condensate discharge as process loads vary.
Constant water seal and unique three-point seating ensure perfect steam-tight seal, even under no-load conditions.
Trap incorporates thermostatic air vent for fast startup.
Built-in screen with large surface area holds back impurities.
Only one moving part, the free float, prevents concentrated wear and provides a long service life.
Easy, inline access to internal parts simplifies cleaning and reduces maintenance costs.